Ever loaded a reel with line by sticking a pencil through the middle.
Loading a reel spool couldn’t be easier or could it!.
I needed to spool some nice new line on to one of my float fishing reels. My line of choice is Colmic Allround. Coupled with great strength to diameter this line sits beautifully on the water’s surface prefect for stick float fishing.
So where do I start? My spool is my first port of call for help. Printed on the side is an approximate line capacity denoted by the line diameter to meters.
On your spool you may find the above denoted in lbs and yards or kg and meters. This is still useful information on how much line we’re going to need to fill said spool correctly. I now know that I will need approx 150 mtr of .12mm dia line or 90 mtr of .20mm to correctly fill the spool. The line I have chosen is as near as dam it .19mm on a 300 mtr spool so I’ll have plenty to fill at least two spools correctly.
Items needed to do the job.
- Small bucket, tub or bowl that a spool of line will fit in.
- Scissors or line clips
- Marker pen
- Bottom rod section
- Reel and new spool of line.
- Cuppa tea or Coffee
What next then? This is the important bit really that is so easy but even easier to get wrong. Ever loaded a reel with line by sticking a pencil through the middle and getting someone to hold the pencil while you whiz the reel handle round so fast it’s as if your trying to beat some world reel spinning record. Or better still done much the same with the line spool on the floor watching it shoot round the lounge like a mad puppy?. Ever wondered why you always get the line springing off your reel in a big birds nest. The above could be part of the problem.
Your fixed spool reel will rotate anti clockwise to wind line on, looking at you nice new spool of line with the label up a most. Picking up the loose end of the line you will notice it will either come off the spool in a clockwise or anti clockwise motion.
As our reel rotates anti clockwise we must have the new line coming off the spool in the same direction. Part of the problem comes if you have the reel is going anti clockwise and the new line is coming off clockwise, this creates line twist.
Having looked at my new spool you can see that the line comes off the spool anti clockwise with the label up a most.
Using the bottom section of your rod fix your reel to the reel seat then pass the end of you new line through the rings. I like to remove the spool from my reel to tie the line on as it makes things that bit easier. There are special knots for doing this but rightly or wrongly I just use a basic granny knot, I also like to pull the line in to one of the groves (if your spool has them) cut the tag end off.
Lifting the bail arm you’ll be able to put the reel spool back on the reel.
Using a small bucket or even a bowl that the new spool of line will fit in. Add a small amount of water then place the spool of line in the bucket / bowl making sure it is the right way up for the line to come off anti clockwise. Water ideally wants to come 1/4 of the way up the spool.
Trapping the butt of the rod under your arm use your left hand to gently trap the line between you finger and the rod blank, this will add a slight tension to the line. Slowly at a constant speed start to wind the reel handle to reel line on to the spool. It is quite important to use a slow constant wind. A fast wind will only end up in a jerky wind, causing the line to snatch back and forth. The water is there to help stop friction caused by trapping the line with your fingers.
You are looking to fill the line just below the top lip of the spool.
When you’ve got your spool filled you can use the line clip on the spool (if fitted) to trap the line when not in use. Cut the line just above the clip.
I always make a note of the line size that I’ve just added to the inside of the spool rim.